Chasing Water Leaks Part II

July 28, 2010

water-leak210% of all homes have some sort of water leak, and can be repaired quite easily. However, hidden leaks are hard to find but can go un-noticed for years and cause significant structural damage.

To continue with the “Chasing Water Leaks” theme for March, Part II of this article is directed at the real hard to find category. By now you should have fixed any leaks associated with faucets, toilets, and any other water delivery devices (dishwashers, ice makers, lawn sprinklers, etc.). If not, make sure and read the posts on Chasing Water Leaks Part I and lawn sprinklers  and resolve those issues first before going any further.  This Part II  inspection will help you discover leaks that may be in the ground, in a wall or very small leaks that can go unnoticed in or around the house. Even if you decide not to do any of the work, isolating the leak for the plumber will save you significant $$’s.

Leak Isolation Group II (main lines and  concealed leaks)

  1. Main water line: Typically houses have a service cut-off immediately before the water service enters the house. Turn off the service cut-off and re-inspect the water meter low flow gauges to see if the meter is still running or not. If the meter still runs, walk the path of the water line looking for dark green grass (in the summer) or wet spots. TIP: Use caution in operating this cut-off if it has not been operated for a year or so, do not force it. You can still walk-out the path without using the cut off. Obviously, if you find something here it will need to be fixed before you can complete the inspection. Finding the leak here may conclude your inspection.  Considered rare, finding a leak here can typically be associated with recent digging.   mold
  2. At this point, the leak you are searching for is probably very small.  You will be looking for traces of water, in the form of moisture or mold. You may just find slight discoloration or the surface may be cold to touch compared to the rest of the surface. Inspect baseboards and walls near or around where water pipes enter the house. Make sure and look on both sides of a wall that may have water pipes in them.  Look for moisture on the walls and floors surrounding all the water fixtures. You may also find distortion on the wall or floor surface as water will cause the building materials to expand. If you find solid evidence, you may have to open the wall to get to it to expose the pipes, but before you do, try to isolate the problem further by following the Foundation methods.  (TIP: Experiencing foundation movement could have been the cause of a leaky pipes in a wall.) If you were unable to locate the leak based on the previous inspection you may eventually require a professional but before you call them try these inspection methods for further isolation.

Pier & Beam Foundations: Houses with pier and beam foundations usually have a crawl space with an access hole. Possibly in a closet or outside around the foundation. If you are claustrophobic, don’t like bugs spiders and crawling things, you want to stop here and call a professional. If you choose to continue, take a good flashlight and crawl in.

  1. Start at the end of the house where the water line enters the house and  crawl the path of the pipes. Look for puddles, wet soil and wet pipes. If you suspect pipes-in-crawl-space1a leak in the wall , look up at the floor boards and all locations where the pipes enter the house above you.  Moisture, dampness, mold is the give away. If it has been leaking for an extended period of time, you may find rotten wood. If the pipe is leaking within the wall, you will probably see water trickling down the pipe to the ground.
  2. If you find water or water damage around the large drain pipes under the toilets, shower, tub or sinks, this will have to be addressed, but is not the cause of water loss through the meter.

Slab Foundations: With slab foundations; walk the perimeter of the house.

  1. Look for damp areas or pools of water
  2. Look for damp conditions or green moss on the concrete and brick. This would not be associated with any gutter downspouts or roof run offs.
  3. At this point, if you  haven’t found it, you may have a leak in an interior wall or under the foundation. If you have had recent foundation movement or foundation repairs, this would increase the chances of this type of leak.
  4. Calling in a professional may be your only choice because it may require  specialized test gear designed to measure for small amounts of water. When you are interviewing a plumber over the phone, insure they are equipped for this type  of diagnostics. Otherwise they will come out and do pretty much the same things you did, then call another plumber (as a sub-contractor) to perform the tests  and charge you for both his time and the other plumber.

Key Inspection Points and Action Items:

  1. Use the  water mter to determine if any water leaks exist.
  2. Inspect in, around, and underneath the house.
  3. Once the leak(s) have been isolated, repair them or call a professional.
Advertisements

Chasing Water Leaks Part I

March 27, 2010

Ten percent of homes have water leaks that waste 90 gallons or more water per day. water-meterParticipate in National Fix-a-Leak Week by fixing a water leak this month.

 

The Silent Thief

A leaky faucet that drips at the rate of  one drip per second can waste more than 3,000 gallons of water per year. If you have a dripping faucet or running toilet, these need to be fixed first and will solve the obvious water leaks. If you need to call a handyman or plumber.. the time is now. If you want to give it the DIY try, visit EHow.com for a straight forward method for fixing common faucet and toilet leaks. However before you start, make sure you have already read my post on Water Supply Cut Off and City Water Cut Off.

 

Even though fixing water leaks is not normally what I would consider as preventative maintenance, fixing a faucet or toilet is something that is hard to miss, if you see it leaking….fix it. However, some water leaks can occur in places you would not normally view. Under the sink, behind the refigerator, and under the house are just some of the places. These type water leaks can go unnoticed for weeks, months or even years. These leaks not only waste water but can cause structural damage to wood floors as well as foundations. If you have no leaks, this inspection is about 5 minutes. If you do, plan on a good part of the day.  Good luck .

 

The Inspection

This inspection method is really about finding those hidden leaks.  Insure that nothing will be turned on (dishwasher, toilet, sprinklers, etc.), or activated during this test. Before performing the inspection you must gain access to the meter. This may require a meter key that can be purchased in the plumbing section of any home improvement center. Once you have the meter box open, the meter should be visible. There are at least a dozen different water meters having different dials and gauges. Look for the “Low Flow” gauge in the meter (in the meter pictured here, the low flow indicator is the little red blob to the left of the large sweep hand, between the 7 and 8 on the dial). If you are unsure which gauge it is, turn on a faucet, leave it on and look at the meter. One of the gauges in the meter will be moving faster than any other part of the dial; this is the low flow gauge. Turn off the fixture, return to the water meter and watch the low flow indicator for approximately 3-5 minutes. If the meter progressively moves forward, you have some form of leak, if not no further investigations are required. If you do have a leak,  you can call a professional or try to further isolate the problem. Either way, it may take some time  as some the leak may not be visible.  $TIP$: Isolating the leak before calling the plumber will save you some money as the plumber will charge you by the hour whether he is looking or fixing a leak. 

water-meter-key1Before we start the leak isolation test, turn the water off here (to make sure you can). It may seem like a simple task and why should you do it just to say you 100_0178can? Because when you really need to, time is of the essence, and you don’t have time to search for the right tool. This cut-off (on the street side of the meter head may be hard to get to, so find the right wrench that will work for you).  A crescent type wrench works best for me. The cut-off is probably a ball valve and you will only need to turn it 90 degrees from its current position. 

 

Leak Isolation Group I (fixtures, faucets and toilets):

If you find a lot of  water or condensation on the fixtures, save the test for a dry or warmer day as this condition will make it difficult to find your problem.

 As mentioned in the beginning of the article, you should have already fixed any obvious dripping faucets. This isolation method is for the hard to find leaks. If the low flow meter stops after any one of the isolation steps, you have found the source of the leak. toilet_water_shutoff_valve

  1. One at a time, turn off each fixture at the wall and return to the meter to watch the low flow gauge. This should include all faucets, toilets, ice makers, water filters, dish washer and water heater (inspect last).   If the meter stops, there is a leak between the cut off and the fixture.
  2. If you find water dripping or puddles, take some unused toilet paper and wipe down the hose, pip, cut-off, fixture and both ends of the connection; everything under the sink.  TRICK: Why use TP you ask? TP is very absorbent, very pliable and you can see any water trace in the paper. Water travels down hill so look at the joints above the first sign of water.
  3. With the water turned on, start your inspection from the highest joint/connection. Look at the TP after wiping down each joint/connection/pipe section/cut-off. If you find any water deposits on the TP, you may have found the leak. Leaks are usually found at joints, couplings and connections. Assuming it can be tightened, do so by hand if possible or with a wrench, or call a plumber. TIP: Most plumbing connection are made with soft plastic, copper or brass, only tighten the joint to the point of not leaking, over tightening can cause it to leak worse.  Many plastic joints ca be tightened by hand. After tightening the joint, dry it completely and perform the TP test again. Perform the test at least twice. If the leak persists, replacing the rubber washer or seal at this joint may be required.
  4. Toilets: Toilets require the TP test as well. Since most residential toilets have a tank, you will have to verify that water is not leaking from the tank to the bowl. Remove the lid from the tank and add some food coloring or colored tank bowl cleaner to the tank water (do not flush). Give it about 5 minutes, then see if any of the color has leaked in the bowl. You may have a leaky flapper valve. 
  5. Check the water meter again. Hopefully you fixed it, but you could still have more leaks.
  6. Perform this series of tests as required for each water fixture in the house. This will include all faucets, toilets  refrigerator mounted ice maker. dishwashers and any other water consuming or delivering device.

Look for articles on Sprinklers Leaks and Plumbing-Chasing Leaks Part II for additional leak detection methods.


Seasonal Reminder – Spring To Do List

March 7, 2009

springSPRING HAS SPRUNG!!  Okay not everywhere. Here in my part of the country the daffodils have been out for about 4weeks. Yep, it got here early, so if your local temperatures are above freezing and the trees are starting to bud, it’s time to move forward… its inevitable. It’s time to fix all those items that broke during the winter months, repair the items that have deteriorated over the last few months and perform a little preventative maintenance around the house. This seasonal reminder  provides a list of items you need to review before the summer months set in. If you need details on what to look for or what to do, click on the link (if there is one) and it will take you to the post that was written on the subject and provide more detail.

  1. Heating/Cooling-Air Filters: Assuming you have a forced air system, change the filter prior to the heavy air conditioning months.
  2. Roofing-Looking For Leaks:  Spring rains are approaching so inspect your roof for leaks, trim away any tree limbs and clean debris off the roof. Look for raised nails and any breaches in the roof surface.
  3. HVAC Outdoor Unit: Get your garden trimmers out and trim away any vines or growth away from the  outside condenser. You should have 18″ to 2 100_0233feet clearance around the unit. Also take your water hose and wash down the outside coils  that may have accumulated dirt. Check the condensation drain that comes from the air handler in the house. Ensure that it is clear of obstacles or debris by pouring water through it.100_02311
  4. Water Leaks: Check all water fixtures and toilets for leaks. Inspect fixture drains for water puddles or loose joints in the traps.
  5. Lawn Sprinklers: Exercise the system. Look for excessive water traveling down the driveway or sidewalks. Inspect the sprinkler heads, look for blow-by and odd spray patterns. Replace or repair the heads.
  6. Exterior Inspection:  Walk around the house, look for rotted wood, peeling paint and other exposed surfaces. Use caulk to re-seal cracks and touch up paint to reseal the surfaces. Replace rotten wood as necessary.
  7. Interior Inspection: Winter dry-out will have caused some surface cracks around doorways and windows. Also  re-caulk/grout any cracks that may have surfaced in the bathroom and kitchen, especially around the tub and shower. These two areas experience the most use and require the most maintenance.  Replace or clean water filters, faucet strainers and vent-a-hood filters in the kitchen. Flush kitchen and bathroom sinks with scalding hot water for approximately 3-5 minutes.
  8. Water Heaters: Tank type water heaters should have their pressure release valve tested (opened and closed). This will also validate the the drain pipe is clear and open.
  9. Gutters and Downspouts: Clean you gutters of leaves and debris. Flush them with water to ensure they flow freely.
  10. Surface Water Drainage: Culverts, waterways, landscape drainage systems should be cleared of debris and overgrowth that may have occurred.100_0206
  11. Windows and doors: Look at the edges where the windows and doors connect to the house. Ensure the caulk is in good shape and add caulk as necessary, indoors and outdoors.
  12. Electrical Service: Inspect the Entrance, Mast and Weather-head. Look for any damage that may have occurred over the winter. Look for tree limbs that may be contacting the entrance cable.
  13. Electrical Service-Smoke Detectors: Clean your smoke detectors of cob webs and change the battery.
  14. Test your security system: Work with monitoring service to validate all the door, window, glass break, and motion sensors operate properly. 

If you are needing some additional information on one of the topics that I have not written about, let me know and I will put it higher on the list of articles to write. Email to HomeownerBOB@gmail.com


Plumbing-City Water Pressure

February 28, 2009

plumbing-faucetCommon water pressure should be somewhere between 45 and 125 psi.

There are many contributing factors that impact this value that may include 1) distances to the water source, 2) size of the distribution lines, 3) elevation of the water supply, 4) primary water line size and the list goes on. However, your plumbing system should work correctly if the pressure is within the 45/125 psi range. If you have just moved from the city to a rural area, do not be surprised if the water pressure is lower than what you have been used to. Contact your water provider to determine if they are within their specification at your house.  (If your house is served by your own well, the primary pump will determine the pressure. Wells will be covered as a separate post.) There is no maintenance inspection associated with the water pressure item other than knowing what it is as a reference as it can cause the system to act differently than normal. Recognizing the  changes will help to determine if any action is required during high pressure conditions, you may experience excessively noisy pipes, clanging or hammering. Low pressure is pretty obvious… low pressure and low flow. Typically, these conditions can be associated with the service provider performing work that required them to open up or turn off the water near by. If the condition does not pass in 24 hours, you may call them to determine how long the condition could continue.  TIP: If you experience low pressure, take the opportunity to fill up some gallon jugs as you may totally loose water pressure before the water line repair is fixed.

waterpressure-gaugeIf you suspect your water pressure to be out of range, you can check it using an inexpensive pressure gauge available at most any home improvement center. To check your water pressure, simply screw the pressure gauge on to an outside faucet (TIP: closest to the water meter) and open the faucet. This will provide an accurate reading. If you find it to be low or high and intend to call the water department, provide them the reading to assist them in their resolution. (TIPKnowing what the water pressure is, under normal conditions, is also valuable information

Since water lines stay under pressure and are considered a closed system, turning the water off, opening the pipes(s) and exposing the interior of the water line allows dirt and mud into the system. It doesn’t matter whether the work  is performed by the water provider, plumber or yourself, it can cause clogged water filters, strainers and faucet nozzles. If you are aware of the work, wait about three days, then clean your faucet strainers/nozzles/filters. Look for a future post on this subject. Plumbing-Faucets.


Plumbing- Water Supply Cut-Off

January 25, 2009

In most cases all houses should have a service cut off independent of the 100_0172water meter. Even though the  function can be performed at either location it is not uncommon for the service cut-off to be inoperable or impossible to find especially in older  homes.  Deterioration to this service  cut-off is not uncommon. If you can find it and it works, this would be the normal location to turn the water off when you need to turn-off the water.  However, if you cannot operate it with relative ease…. DON’T FORCE IT as it can be broken easily without to much effort. As you can see in this second picture there are several cut-offs and the handles have corroded away. I had to dig out a pail of dirt just to take the picture. If turning the water off at the meter is you choice, see 100_0176 Plumbing-City Water Cut-Off.  If this water cut-off does not work and does not leak and you can still turn the water off at the meter, just leave this one alone.  The day may come when you find it leaking, replacement will be your best option at that time. 

Regardless of where you choose to turn your water off, ensure that it can be performed in one of the two places, and turn the water off at least once to say you did. If you have a plumbing problem typically you need to turn the water off fairly quick.  A leak can put a lot of water on the floor as well as cause an expensive call to a plumber. If you can schedule a plumber based on his schedule, instead of an emergency call out, the cost difference is dramatic.

Key Inspection Points and Action Items:

  1. Locate the water cut-off.
  2. Atempt to turn the water off here, if not,  go to the water meter.

Plumbing-City Water Cut-Off

January 16, 2009

Knowing how to turn the water off here is a valuable tool in your home knowledge arsenal. Being able to turn the water off changes the complexion of your relation with a plumbing emergency as well as the plumber. It may seem like a simple task and why should you do it;  just to say you 100_0178can? Because when you really need to, time is of the essence, and you don’t have time to search for the right tool. This cut-off, on the street side of the meter head, may be hard to get to so find the right wrench that will work for you.  A crescent type wrench works best for me. The cut-off is probably a ball valve and you will only need to turn it 90 degrees from its current position. Be prepared, when you open the meter lid, you will probably find many bug friends as it is a great place to hang out if you are a cock roach. Give it try.


Plumbing-City Water Meter

January 14, 2009

watermeter2The city provides a water meter  to determine how much to charge for water usage and also a place to turn the water off. The meter can also be used as a tool to recognize water leaks.  If your water bill dramatically changes and cannot be related to service work, changes in household routines, extra house guests or summer watering, the water meter should be the place to start to determine if there are any hidden water leaks.  Obviously, if you have any recognizable leaky faucets, fixtures or toilets, these leaks should be addressed.  $TIP$: Many municipalities charge related services (sewage, trash pickup) on the same bill, these charges can be relational to total water usage. If you have leaks you may be giving the city extra money due to a water leak. Look for the upcoming post on Chasing Water Leaks  for a leak isolation method.