Wall Outlets Feel Warm?

According to the United States Fire Association (USFA) Electrical fires in our homes claim the lives of 485 Americans each year and injure 2,305 more. Some of these fires are caused by electrical system failures and appliance defects, but many more are caused by the misuse and poor maintenance of electrical appliances, incorrectly installed wiring, and overloaded circuits and extension cords.

A day doesn’t go by that I don’t get a comment on the webpage about warm or hot electrical outlets.  Before we get into the guts of the issue, lets define what most (residential) electrical branch circuits are designed to provide.

NEC 210-23  15 and 20 Amp branch circuits: …The rating of any one cord- and -plug connected utilization equipment shall not exceed 80% of the branch circuit rating. Furthermore… the total rating of equipment fastened in place shall not exceed 50% of the branch-circuit. In short, no one plug should exceed more than 80% of the circuit rating and that any stationary equipment (i.e. dishwashers, waste disposers) that constantly draws power should not exceed 50% of the rated circuit. Typical residential branch circuits (outlets, wall switches and fixtures) may be rated at 15 or 20 Amps.  Typically things like window air conditioners, washing machines and refrigerators are on their own circuit.

NOTE: This is a very basic description of this code requirement and how it is applied to typical residential branch circuits. There are numerous differences when applying the code to specific uses. Greater detail can be found in sections 210 and 220 of the NEC. 

 The National Electric Code (NEC) was originally developed in 1897. As the housing market continues to respond to new demands and changes in the industry, the Code is continually updated. However, as with most houses, the electrical system installed in the house was designed based on the code of the era and unless the house has had the electrical system upgraded, either all or part of the system is still based on the original design.  The most noticeable change to the average homeowner is that older homes have fewer outlets per room, and for this reason, it can be common to find excessive extension cords and power strips. All of these item place greater strain on a system that may have been designed and built 50 years ago.

Why is the electrical outlet warm?

  1. What’s plugged in: Things  like  cell phone chargers, computer printers, lawn sprinkler controllers, DLS Modem, video cameras, MP3 players, cordless drills and some small appliance. All these products use a “transformer” (aka: wall wart). Based on what they do (change the voltage input to a different voltage output) will cause them to be warm. Unplug it, wait about an hour and check the outlet again. The outlet should be normal ambient temperature. It is not uncommon to find these wall warts as much as 20 degrees warmer than ambient. However if you find one that is too hot to touch, it should be replaced.
  2. Excessive Demand At An Outlet: As stated above, no one device plugged in to a single outlet (receptacle) should exceed 80% of the rated circuit.  To get perspective, residential grade appliances that are designed to plug directly into a standard (15A) wall plug will normally not exceed 1500W; such as a blow dryer (1500W/110V)/.95=14.35A  ((Watts/Voltage)/PowerFactor =Amps).  With two blow dryers in the same outlet or on the same circuit the circuit breaker should trip (e.g. turn off).  Add in the fact that in many older homes it is very common to find extension cords, outlet multipliers, outlet extenders or un-fused power strips. All of these items can increase the opportunity to overload an outlet.
  3. yellowstone-0111Excessive Demand on the Circuit: Most standard residential electrical circuits are wired in a series where the circuit wires loop through the electrical box, terminate on the outlet, then continue on to the next outlet.  In other words, the electrical current being used by one outlet (on the same circuit) may pass through terminations of another receptacle. If the current is excessive, the outlet may be warm without anything attached at the receptacle.  As part of an electrical design, it is normal  to have at least one outlet in the same room to be on a different circuit.  This allows you to share the load requirement from one room into multiple electrical circuits.
  4. Poor Electrical Terminations: If electrical terminations (at the receptacle) are loose, or the wires are damaged, this too can cause excessive heat at both the point of use as well as in the circuit described in #2. Additionally, outlets terminated using the spring-loaded  stab-lock on the rear vs. the screw-down attachment can cause excessive heat.
  5. Oversized fuse or breaker:  Typically these values can be compromised in older homes as there are fewer outlets per room, and the circuits are not designed to support all the electronic gear we find in the modern home. Assuming the circuit was installed correctly, the circuit breaker should be the lowest rated item in the circuit and the wire in the wall should be the highest. For obvious reasons, if there was a fault or failure, you want the circuit breaker to fail first. If a breaker was replaced with a higher ampacity breaker, the circuit has been compromised potentially creating a fire risk by allowing higher current levels to pass through the circuit that was designed at a lower level. In this case finding a warm outlet is a warning that the wiring may be operating above its rating.
  6. Physical Deterioration of Plug: Outlet that appear worn, broken, cracked or chipped are all conditions that can compromise the function its function and can create heat at the outlet.

In urban areas, faulty wiring accounts for 33% of residential electrical fires.

What to Do?  Analyze the problem within your capabilities. Some of these suggestions may be beyond your comfort (experience) level, so you may want to contact an electrician at this point.

  1. Identify all the receptacles associated with the warm outlet.  After turning off the circuit breaker use an outlet tester to find all the outlets. Identify the circuit breaker rating found on the paddle of the switch. TIP: Inspect the entire house, both outlets and light fixtures. With the circuit breaker off you will be looking for dead outlets.
  2. Do any of the outlets have extension cords, power strips or outlet multipliers? Ensure the extension cord is rated  for its use.  Replace all unfused power strips or outlet multipliers with a fused power strip  as these devices include a circuit breaker to add further protection. Do not daisy chain multiple power strips or extension cords. Try to de load the outlet by re-associating the plugs to different circuits.
  3. Follow the testing methods as found in Electrical Switches and Outlets. These testing methods will identify any wiring issues that should be resolved as well.
  4. By now, you may have found the problems associated with an outlet, fixture or receptacle. If you still have problems, the outlets may be internally bad, the connections may have deteriorated or may be loose. With the electricity off, inspect the wiring of all suspect outlets. Check for tightness of the screw terminations, crimped or cut wires. You can also perform this test by using a digital thermometer gun with a laser site. Scan the electrical outlet, specifically the wiring terminations,  without disturbing the wiring. The probe should identify the problem by indicating a noticeably higher temperature.
  5. Replace suspect receptacles with higher quality equivalent receptacles using the screw down connection point.
  6. If you still have problems, review the tests found in the Electrical Service Panel post. Perform the tests that apply to the condition.
  7. If you still have problems, the circuit may have been compromised by enlarging the breaker, you may consider hiring an electrician to validate the condition and to correct the problem.

Additional Items to Consider

With over 15% of all electrical fires originating in the bedroom, municipalities have adopted local electrical code requirements that include arc fault circuit interruption (AFCI) circuit breakers to be installed in new construction. These breakers have the ability to recognize an arc usually due to a defective cord appliance or wiring.

One of the newest concern with electrical fires is the fact that many extension cords, plug adapters, power strips, appliances and etc. are coming from overseas areas that use counterfeit certifications. Here in the U.S., agencies such as UL, ETL, CSA are recognized as certified testers of electrical products. Unfortunately, many items are filtering in with fake labeling.  Always purchase name brand products from reputable stores and inspect the product for the safety agency’s certification.

24 Responses to Wall Outlets Feel Warm?

  1. […] my article on Warm Outlets. Possibly related posts: (automatically generated)Vampire killersElectrical Products – Electric […]

  2. ray says:

    i installed age digital wall timer to control my outside lights and the timer gets warm is this normal?

  3. Perry says:

    Thanks so much for the great advice, Bob! This happened with one of my bedroom outlets over the weekend: I only use it for my cell phone charger and one lamp;went to unplug the charger and almost burned my fingers it was so hot!! I called my handyman and he said it could be the charger, and to check it again in a couple hours, as you’ve said. Well, we weren’t home again until late at night, and when I checked it it was even hotter, and looking down into it(in the darkened room) I could see something glowing, very scary!!! Since it was after midnight, I decided at that point to shut off the circuit breaker to the whole room(lesson: label your breakers! It took about 20 minutes to find the right one); only then did I feel comfortable going to bed.
    Called my handyman first thing in the morning, and he came by with a new outlet and replaced it; the top plug of the outlet had a burn mark and he said the neutral wire was what failed, which was unusual, unless it had just become loose. I do have some other outlets that are a bit loose, but don’t recall this one being so.
    Now I’ll be going out and getting a thermometer gun to check all the other outlets just in case any others are funky, per your and his advice.
    Can you please tell me about why the neutral would fail?
    Thanks again for all the great info!!

    • homeownerbob says:

      Perry, Preventative maintenance and being cognizant of the issue is half the battle. I am really happy to hear “all is well”.
      As you can understand, the neutral is the return path for the AC current. So you are passing most of the current on the neutral (return) side as the supply (hot) side.
      There are several things that could have happened and without seeing it, I cannot be 100% certain, but I would believe it to be a loose connection. As I have mentioned in other electrical articles, the electrical wires loop from one outlet to another, so it can still be passing current even without anything plugged in to the specific troubled outlet. As for the failed neutral conductor, a loose connection can actually start arcing much like welding. In doing so, it can consume the conductor leading to a failed neutral conductor.
      Thanks for sharing your story; I am glad to be a small part of the solution.

  4. Rob Redmond says:

    I have a plug in my bed room that I plug a space heater in and there are two plugs in my living room that get warm to the touch is that ok

    • homeownerbob says:

      I probably have more questions than answers at this point, but here goes:
      1. I assume the plugs in the living room are warm, but nothing is plugged into them?
      2. The plugs are only warm when using the space heater?
      3. Has the space heater ever tripped (turn off) the circuit breaker?
      4. Have you plugged other item into the living room plugs? Did the circuit breaker trip ?
      5. Did you try any of the items recommended in the article? If so, what did you try?
      So my reply will be based on 1+2 =YES .
      1. Noticeably warm is not normal. They should be close to ambient when not in use. It would not be un common to find them a little warm if for instance you had just used the vacuum cleaner.

      Let me know, BOB

  5. Bob Neidorff says:

    Great advice.
    Please note that your equation for current has an error.
    With power factor <1, current is higher than expected based on power because some of the current is out-of-phase with the voltage and circulates without doing any work.
    So the current (amperes) will be (Watts/Volts)/PowerFactor.

  6. kathryn castle says:

    I noticed In my sons room the outlet by his bed was very hot nothing has been plugged in here so i checked other outlets a d 2 of the three in the room behind his were warm as well with nothing plugged into them we turned the breaker off overnight and the next day turned it back on again it got hot in a couple hours so we took off the cover there is no corrosion or loose wires what is this caused from and what do we do.

    • homeownerbob says:

      I have more questions than answers at this point, but we got to start somewhere. Looks like you have done some base line work, and that’s good. Here are a couple other questions:
      1. With the breaker turned off, were you able to identify where else the circuit shows up?
      2. What devices or equipment is on the same circuit breaker?
      3. Is there any device that is attached “full time” to an outlet on the same breaker? Such as a window air conditioner or refrigerator?
      4. Was the breaker warm as well?
      5. What size of breaker is it?
      My guess at this point is that either you have something that is in use full time, or the breaker is oversized. Let me know the answers to the questions, and we might can narrow it further.

  7. Johnc160 says:

    whoah this blog is wonderful i like reading your articles. gfkbeceakdbe

  8. nyd says:

    what if nothings plugged into the outlet? its as hot as a toaster but it hasnt been in use for months.

    • homeownerbob says:

      Sorry for the delay in my reply. As mentioned in my article, there could be several things going on. The circuit could be overloaded or the terminations of the wires on the outlet could be loose. Try replacing the outlet first and see if that fixes. Make sure and follow all the tips I mentioned in the article. BOB

  9. Michelle says:

    While cleaning my daughter’s room I noticed one of her stuffed animals was warm to the touch, like it was laying against a heater vent. Further inspections made me realized that the warmth was due to the wall outlet it was leaning against that happen to be unusually warm. We cut the electricity and my husband pulled the wall outlet out to check if anything was loose and found everything to be sound. Our house is a brand new with a warranty so we placed a call and hope to have someone look at it. The odd thing is that we have kept the electricity off, and a few hours out, the outlet still feels warm. I am now wondering if it may be connected to another breaker, even though the one it is connected to shares with another bedroom. Is that possible? Or could it be caused by something else?

    • homeownerbob says:

      You could have around 10-12 outlets all on the same circuit breaker, and the way they are wired, current can be passing through the terminations on the back when current is being used at another outlet. Most of outlets will be in the same room but they could very well be in nearby or adjoining rooms. At this point, I would see if you can find all the outlets on this same circuit. The easiest way to do that is to get a outlet checker from HD or Lowes, turn the breaker off and look for the dead outlets. This will tell you what was running or using power. My first guess is you may have one or multiple items on that circuit that use a lot of current. If no other outlet is warm or you don’t find anything connected, I would replace the outlet. Let me know what it turns out to be. My article on warm outlets describes the isolation method in greater detail. BOB

  10. Korie Buttles says:

    Also, the outlet is fine when things are plugged into it (such as a lamp), and it is the only outlet that becomes warm when the space heater is used.

    • homeownerbob says:

      Korie, its best to get them checked. In general space heaters use a lot of electricity. As a constant load it is drawing a lot of amperage through the circuit. There is a good possibility that you have either an 1)outlet going bad, 2)or poor or loose connection. BOB

  11. jake says:

    I am renting an older home and after having an electrician check the outlets and replace three of them, the two in the kitchen are still 12 degrees warmer than they should be. And the black circuit breaker that turns off the electricity to the unit has been pushed . (No power or current going through it. Why would the plug be warm to the touch and 12 degrees higher than surrounding areas?

    • homeownerbob says:

      Hi Jake,
      It’s probably not any one thing as 12 degrees is more noticeable than significant. Heat is derived from resistance. I would recommend that the wires at the sockets in question be 1) all opened up, 2)cut back (past the insulation, 3) restriped and 4) re-terminated to create new, fresh copper connections to eliminate any connections that might be stressed. Then replace the socket as well. Re measure, and see what you get. BOB

  12. Renee says:

    Ive noticed some changes in the kitchens outlets, one has an extension cord attached, that has the refrigerator an extra freezer and another extension for the stove attached. lately ive noticed the extension connected to the wall getting hot when stove is on, so i repaced it and now only gets slightly warm, bur freezer and refrigerator dont affect it at all. completely cold when stove isnt on. the outlet has been giving out a slight odor after boiling water too. Today after i cooked food, i noticed that an unused outlet next to this one got hot and smelled like molten plastic. this hasnt happened before and the outlet has been unused for a year or so. what could be the cause? this happened today. last week my brother checked both outlets and didnt find any problems in the wiring hes not an electrician per say, but he has learned some stuff on his own. any advice?

    • homeownerbob says:

      If I am reading your post correctly; you have both a refrigerator and a separate freezer connected through an extension cord at the same outlet? My first comment is that you are pushing the circuit to its limits, if not past it, and why you haven’t blown the breaker yet is another problem. The plastic you are smelling could easily be the extension cord or the wiring in the wall. Either way, this is not good. Either the refrigerator or the freezer needs to be relocated to a different circuit immediately as a temporary measure or turned off. To correct the problem, (per the NEC code) the refrigerator and the freezer need to be on their own dedicated circuit, meaning no other appliance should be on that circuit. Granted, this may be some extensive work to do it, but based on what I think you are dealing with, it’s better than burning the house down.
      Regarding the stove, I am guessing, it is an electric stove? If so, because it should be a 220V circuit, it should not be an issue. But without looking at it, you could have some things mis-wired at the breaker panel. Once you create dedicated circuits/outlets for the refrigerator and freezer, I think any issue with the stove may go away.

  13. Chad says:

    I have a light timer pluged in and the outlet gets a little warm.is that safe?

    • homeownerbob says:

      Chad, If it is and old school (electromechanical) timer, it will get a little warm by nature (no more than 10-20 degrees above ambient). If it is all electronic (digital), probably not. You will need to do a little testing through elimination. 1)Move the timer to an outlet in another part of the house, you will want to be on a different circuit. 2) If it still gets warm above your expectation, replace the timer. 3) After waiting 3-4 hours, is the outlet warm without anything plugged in? 4) if so, change the outlet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: