The colder months make it easy to find problems associated with door and window seals. I spent the day caulking window casings and sills today (inside the house). With the temperature hovering around 25F, it was easy to find the bad spots. Lucky for me, my house is in pretty good shape. I haven’t done any window maintenance in about 4 years.
It’s not uncommon to see shrinkage (not the George Costanza type) in building materials such as caulk, grout, wood trim and spackling (all water based products). This is usually the time of the year you will see more cracks around your shower, bathtub, kitchen as well as windows and doors. This is a great time to do interior caulking in all of these places. If you own a new house that is less than 5 years old, you will probably notice significant amounts of cracks related to this type of contraction. It’s is important to understand; caulking is not a one time event. The material will continue to move and you may have to continue to re-caulk over the years.
PURPOSE OF CAULK: Caulk or sealant is used to bridge the gap between two material. Typically corners, seams and edges, especially where two dis-similar material meet. Caulk is used to create a barrier for air, water, grunge and 4 legged creatures from entering the house as well as keeping untreated materials from being exposed to those elements. Universally, caulk is used as an exterior and interior sealant to protect both you and your home.
CAULKING AND SEALS
Window Caulking: Assuming you have functional windows, the caulking should be limited to the where the two opposing surfaces contact each other. (i.e. window frame and wall). If there are gaps and cracks, clean them and fill with a thin coat of water based acrylic latex caulk. Painting after you finish may be required, but that is your call. My trim is off white and it blends well enough to be left as is. If you find no cracks or gaps leave it alone, no need to add layers of caulk just because. I took these before and after pictures of one of my windows. Hopefully you can see this is a very thin seasonal dryout crack that I filled with caulk.
Tub and Shower Caulking: Similar to windows. Look where the tile or wall surface touches the tub it self. This is where most of the problems are. Keeping a good water tight seal at this location is critical in keeping water from getting behind the tub; and same goes with the shower. These surfaces will require more regular inspection and recaulkng to keep them up to snuff. If you live in an older home you may find lots of caulk gunked up here. If you continue to see mold in this location even after caulking, it would be a good idea to spend the time and remove all the old caulk, let it dry and replace all the caulk. This is a very laborious job but once its done right you will not have to caulk near as often. Inspect for recaulking every 6 months.
Caulking “Part Art Part Function“: Caulking appears to be an easy task, however it’s also very easy to make a mess of it. One of the reasons I use a latex based product as often as possible is because its very easy to start over if you mess up. TIP: After applying the bead of caulk, moisten your finger and smooth the caulk into the corner, if you have too much caulk it will spread outside your finger, wipe it off and keep going. Use a wet rag to carefully clean it up. If needed, use your finger again. Continue to work it until you like the way it looks. Even though most instructions will not include this tip, I learned this from a wise old painter and it really makes a difference.
It’s estimated that up to 11 percent of the air leaks in a building are around the doors.
Door and Window Trim: This is related to the trim or molding around the windows and doors. Typically this is done prior to painting. Look for small dryout cracks at the joints and edges. Try to force the caulk in the crack it self and wipe clean the surface. Look at these before and after pictures of this interior door trim.
Door Seals: All exterior doors should have some form of seal. It could be rubber, plastic, foam or even metal strips (usually copper). This seal creates a barrier to keep the outside temperatures outside, and the inside temperatures inside. Inspecting this on a windy day can reveal leaks. Look at the seal(s), ensure they are in tack, and form a complete seal around the door frame. Look at the door threshold in the same way. In some cases there may be a wiper (thin rubber strip on the bottom of the door) to make contact with the threshold when the door closes. If you find problems, you may be able to fix them but most likely the complete seal may have to be replaced. The local hardware store usually has many styles to choose from. When replacing a door seal, it is important to find the right one. Using one that is too think will make the door difficult to open and close. Look at this site on weather-stripping for a detailed description of the various styles.
Attic Entrance: Either a hatch or attic stairs. If it’s a hatch seal it the same way as a crawl space hatch. If you have a hinged stairway you can seal the door much like the crawl space, however adding insulation over the hatch will provide additional value. Here are some examples of tents and hoods that will work. If you have room, you can make one out of insulated fiber board.
Crawl Space Entrance: If you have a basement or the house is built on a slab, this will not apply to you. Many houses with a crawl space will have a hatch in the floor. Use a small strip of foam based weather-stripping attached to the contact surface between the hatch and floor, this will help keep the winter drafts down. TIP: It doesn’t hurt to have a patch of fiberglass insulation to fill the void in the hatch hole, it would be removed when you need access.
For more detailed methods of caulking and sealing see the attached DOE article covers the subject of caulking, sealing weather-stripping. Weatherizing your Home.